Home » Wiki » Discover your hardware » Συζήτηση
Σελίδα συζήτησης της σελίδας του wiki Discover your hardware
how to translate this into Spanish?
Δημιουργήθηκε από τον/την rastrojo, 17:04, 7 Απρίλιος 2012

simply add the translation in the bottom?

There is an option to translate?

¿cómo traduzco esto a español?

¿simplemente agrego la traduccion en la parte de abajo?

¿existe alguna opción de traducir?

Descubra su hardware
Δημιουργήθηκε από τον/την Ark74, 00:07, 8 Απρίλιος 2012

We already have this wiki translated, at the botton we have language options.

See: http://www.h-node.org/wiki/page/en/l10n-process
7100 MEMORY and other info
Δημιουργήθηκε από τον/την jodiendo, 12:29, 25 Ιανουάριος 2013
This notebook was purchase on JAN 2006. The memory was currently upgraded to one GB, from 512. capable of 2G. Using KVR333X5NC25/1GB KINGSTON. Original was pc3200(CL3)512MB DDR SO DIMM MODEL M2SAJO8D-HX TWINMOS. Changing the frequency one step higher did not affected anything. The Harddrive is a PCI 80GB MADE BY WESTERN UNION. It does have an SD card reader. The keyboard has been replaced due to past stick keys issues. Under Linnux OSI it runs cooler and batter last at least 4 hours.
Δημιουργήθηκε από τον/την lammi87, 13:42, 27 Ιανουάριος 2013
Please report your laptop to the database. See instructions here. Also find out the real name of your laptop. See below your laptop or battery.
New page for hardware testing
Δημιουργήθηκε από τον/την TryHardDieHard, 23:46, 10 Σεπτέμβριος 2014
I moved the info regarding hardware testing to its own page at http://h-node.org/wiki/page/en/How-to-test-your-hardware .
Login Bug on h-client
Δημιουργήθηκε από τον/την libre, 07:42, 18 Ιούλιος 2016
Ey,it is not possible to login into h-client. :( Parabola GNU/Linux
Add Olimex products
Δημιουργήθηκε από τον/την jcstaudt, 13:01, 31 Ιανουάριος 2019
Can we add Olimex to the list of drop-down vendors? Several GNU/Linux distros are supported and the hardware is so open, you can use libre software such as KiCad to inspect/modify/contribute.
Many commands are not working
Δημιουργήθηκε από τον/την fosh, 13:33, 13 Αύγουστος 2023
Maybe this is because I'm attempting to do this will the Parabola ISO (2019), and have yet to properly install the distro, but most commands suggested on this page produce errors. The only command that has worked is the 'uname' commands. The remaining commands such as lspci, lsusb, lscpu and hwinfo produce, respectively: - "Input/output error", - "Input/output error" (yes, same), - "Segmentation fault", and - "Bus error (core dumped)"

Write below your motivation

h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information